Danfoss AHF 005 Operating Instructions Manual page 30

6 Appendix: Safety and Application Notes
The electrical installation must be carried out according to the appropriate regulations (e.g. cable cross-sections, fuses, PE-connection). More detailed
information is included in the documentation. When using the filter module with frequency converters without safe separation from the supply line (to
VDE 0100) all control wiring has to be included in further protective measures (e.g. double insulated or shielded, grounded and insulated).
6.1.6 Operation
Systems where filter modules are installed, if applicable, have to be equipped with additional monitoring and protective devices according to the valid
safety regulations e.g. law on technical tools, regulations for the prevention of accidents, etc.
After disconnecting the filter module from the supply voltage, live parts of the filter module and power connections must not be touched immediately,
due to the possibility of charged capacitors.
During operation, all covers and doors must be closed.
6.1.7 Maintenance and service
6
The manufacturer's documentation must be observed.
This safety information must be kept!
The product-specific safety and application notes in these Operating Instructions must also be observed!
30
®
MG.80.C1.02 - VLT is a registered Danfoss trademark
AHF 005/010 Operating Instructions