Table of Contents
Advertisement
Approximate run times for the following measurements are shown below:
HG (without
SL(without B2)
DS
ZS
UV
UX
UM
FM
Writing Schedules:
Determine the Scientific Objectives, and draw up a table of Solar Zenith Angle vs.
•
Commands.
Use the SA command to assist in relating to local time.
•
From the Brewer main menu, send the Command SE.
•
a table will appear on the screen with two columns, one for SZA, and one for the commands
•
to be executed at the SZA.
starting with the first SZA after solar midnight (it will probably be -ve), enter the SZA in the
•
left hand column of the table, and enter the commands to be executed at that angle in the
right hand column.
carry on through the day, remembering that the SZA changes to +VE after noon (no sign
•
defaults to +ve).
when the schedule is finished, press Ctrl+End and follow the instructions for saving the
•
schedule.
the schedule can be tested using the SK or SKC routines.
•
64
7-9 min.
9 min
3 min
4 min
8 min
6 min
Indeterminate must be aborted with
HOME key or new schedule entry
11 min
MKIII OPERATOR'S MANUAL
Advertisement
Table of Contents
