L-Acoustics Kara IIi Owner's Manual page 77

Assembly
Procedure
1. Secure KARAIIi-TILTBRACKET to the ground using M10 screws and fasteners.
2. Prepare a Kara IIi.
a) Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A or B) that are not used.
Remove the relevant placeholder screws.
At the bottom rear, remove placeholder screws "A".
b) Secure KARAIIi-LINK on the enclosure.
For an array of one enclosure, secure KARAIIi-ENDLINK instead.
Do not secure the bottom screws.
Kara IIi owner's manual (EN) version 2.0
778 mm / 30.6 in
B
A
Rigging procedures
Ø 12 mm / 0.5 in
B
A
77