L-Acoustics Kara IIi Owner's Manual page 111

D/R - HF driver
Tools
• torque screwdriver
• T30 Torx bit
Repair kit
G03521 *
KR compression driver 3" Kara II(i)
D17986
3" HF driver - 8 ohms assembly
* The screws and fasteners are also provided in G03520 (KR diaphragm for 3" driver Kara II(i)).
Prerequisite
Connector plate removed.
Exploded view
For safety reasons, always use the new screws and spare parts provided in the KR.
If no new screws are available, use blue threadlocker.
Carefully disconnect the cables before removing the driver assembly.
Use the positive (red) connector as a reference point to position the driver assembly.
5 N.m
x2
T30
Kara IIi owner's manual (EN) version 2.0
×1 ×2
S247
M6×35 Torx
See Connector plate (p.110).
Corrective maintenance
111