Mounting An Sb18 Iii / Kara Iii Array With Karaiii-Fixbracket - L-Acoustics Kara IIi Owner's Manual

Mounting an SB18 IIi / Kara IIi array with KARAIIi-FIXBRACKET

Type of deployment
Rigging accessories
Screws and fasteners
Tools
Min. number of operators
Rigging plates
x2
KARAIIi-FIXBRACKET
Fastening brackets for
Kara IIi and SB18 IIi
KARAIIi-TILT
Rigging elements with angles for
Kara IIi above or under SB18 IIi
Fasteners for ceiling-mounting
Select screw length and anchors applicable to the ceiling properties.
Model the array in Soundvision and check the loads on rigging in the Mechanics view.
Kara IIi owner's manual (EN) version 2.0
ceiling-mounted
KARAIIi-FIXBRACKET
KARAIIi-TILT
SB18IIi-ENDLINK
Kara IIi rigging plates
M6×18 Torx rigging screws (provided)
4 × M10 screws and anchors
torque screwdriver
T30 Torx bit
3
x2
KARAIIi-LINK KARAIIi-ENDLINK
Rigging plates End rigging
for Kara IIi plates for Kara IIi
x2
x2
SB18IIi-ENDLINK
End rigging
plates for SB18 IIi
Rigging procedures
x2
73