L-Acoustics Kara IIi Owner's Manual page 71

This step requires three operators.
Hold the enclosure at the bottom until the rigging plates are secured.
5. Secure an additional enclosure under the array.
a) Turn the next Kara IIi upside-down and link the enclosures at the front with rigging screws.
Do not fully tighten the screws.
b) Link the enclosures at the rear with rigging screws.
Select the holes and inserts depending on the inter-element angle.
Kara IIi owner's manual (EN) version 2.0
+10°
+7.5°
+5°
+4°
+3°
+2°
+1°
0°
A
B
Rigging procedures
71