L-Acoustics Kara IIi Owner's Manual page 70

Rigging procedures
4. Prepare one or two additional Kara IIi.
Risk of acoustic leaks
a)
Do not remove the placeholder screws from the bottom rear inserts (A or B) that are not used.
Remove the relevant placeholder screws.
Kara IIi rear linking points
rigging accessory
KARAIIi-LINK (connecting from an enclosure below)
KARAIIi-RIGBAR (last enclosure with pullback)
KARAIIi-TILTBRACKET
none (last enclosure in the array)
b) Secure the rigging plates on the enclosure:
• KARAIIi-LINK on the second to last enclosure,
• or KARAIIi-ENDLINK on the last enclosure.
Do not secure the bottom screws.
70
B
A
inter-element angle
0°, 2°, 4°, 7.5°
1°, 3°, 5°, 10°
–
all angles
–
Kara IIi owner's manual (EN) version 2.0
A B
used inserts
A
B
B
A
A