Corrective Maintenance; Introduction; Tools And Consumables - L-Acoustics Kara IIi Owner's Manual

Corrective maintenance

Corrective maintenance

Introduction

This section contains the following maintenance procedures:
Kara IIi
• Grills (p.107)
• Fins (p.108)
• LF speaker (p.109)
• Connector plate (p.110)
• HF driver (p.111)
• HF diaphragm (p.112)
SB18 IIi
• Grill (p.115)
• LF speaker (p.116)
For advanced maintenance, contact your L-Acoustics representative.

Tools and consumables

Before performing maintenance on this product, make sure all the tools listed are available. References are given for
FACOM ® products in this table. Other manufacturers can be used.
name
Set of 6-point 1/4" sockets *
Torque screwdriver (2 - 10 N.m) *
compressed air blower
at plastic tool
double face adhesive tape
* included in the L-Acoustics Maintenance Toolcase.
Maintenance Toolcase
The Maintenance Toolcase is a carry-on suitcase that includes all the tools required to perform maintenance on L-
Acoustics products. This toolcase is aimed at Certied Providers.
The Maintenance Toolcase uses a Peli
tools. The Maintenance Toolcase includes tools manufactured by FACOM
All third-party trademarks, registered trademarks, or product names are the property of their respective owners.
104
reference
RL.NANO1 / R.360NANO
A.404
–
–
–
™
1510 Protector case that features three pre-cut layers of foam to safely t the
distributor
FACOM
FACOM
–
–
–
® ®
, Fluke , Tohnichi, ABUS and Würth.
Kara IIi owner's manual (EN) version 2.0