Rigging procedures
c) Remove the top rigging screws from Kara IIi.
10. Prepare additional Kara IIi.
a)
Risk of acoustic leaks
Do not remove the placeholder screws from the bottom rear inserts (A or B) that are not used.
Remove the relevant placeholder screws.
Kara IIi rear linking points
rigging accessory
KARAIIi-LINK (connecting from an enclosure below)
KARAIIi-RIGBAR (last enclosure with pullback)
KARAIIi-TILTBRACKET
none (last enclosure in the array)
88
B
A
inter-element angle
0°, 2°, 4°, 7.5°
1°, 3°, 5°, 10°
–
all angles
–
Kara IIi owner's manual (EN) version 2.0
A B
used inserts
A
B
B
A
A