Corrective Maintenance - L-Acoustics X12 Owner's Manual

Corrective maintenance

Corrective maintenance
Introduction
This section contains the following maintenance procedures:
• Grill (p.76)
• Coaxial loudspeaker
• HF diaphragm (p.78)
For advanced maintenance, contact your L-Acoustics representative.
Tools and consumables
Before performing maintenance on this product, make sure all the tools listed are available. References are given for
FACOM ® products in this table. Other manufacturers can be used.
name
Set of 6-point 1/4" sockets *
Torque screwdriver (2 - 10 N.m) *
5 mm hex bit - spherical head *
T10 Torx bit
3 mm hex bit
3 mm hex wrench
compressed air blower
double face adhesive tape
* included in the L-Acoustics Maintenance Toolcase.
Maintenance Toolcase
The Maintenance Toolcase is a carry-on suitcase that includes all the tools required to perform maintenance on L-
Acoustics products. This toolcase is aimed at Certied Providers.
The Maintenance Toolcase uses a Peli
tools. The Maintenance Toolcase includes tools manufactured by FACOM
All third-party trademarks, registered trademarks, or product names are the property of their respective owners.
74
(p.77)
reference
RL.NANO1 / R.360NANO
A.404
ETS.105
EX.110
-
-
-
-
™
1510 Protector case that features three pre-cut layers of foam to safely t the
distributor
FACOM
FACOM
FACOM
FACOM
-
-
-
-
® ®
, Fluke , Tohnichi, ABUS and Würth.
X12 owner's manual (EN) version 1.0