Table of Contents
Advertisement
8.7.1
Decommissioning
CAUTION!
Used machines need to be decommissioned in a professional manner in order to avoid
later misuse and endangerment of the environment or persons.
Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.
Dispose of machine components and operating fluids using the intended disposal
methods.
8.7.2
Dismantling
Pull the power cord or disassemble the connection cable and disconnect the connection
cable.
8.7.3
Disassembly
Disassemble the drive motor.
8.7.4
Packing and loading
Place the machine on 1 palettes to allow for removal transport.
Installation and assembly on page 22
8.8
Disposal of new device packaging
All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to the
waste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are passed to a collection station or
to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
8.9
Disposal of lubricants and coolants
ATTENTION!
Please imperatively make sure to dispose of the used coolant and lubricants in an
environmentally compatible manner. Observe the disposal instructions of your municipal
waste management companies.
INFORMATION
Used coolant emulsions and oils should not be mixed since it is only possible to reuse oils with-
out pre-treatment when they have not been mixed.
The disposal instructions for used lubricants are made available by the lubricant manufacturer.
If necessary, request the product-specific data sheets.
8.10
Disposal via municipal collection facilities
Disposal of used electrical and electronic components
(Applicable in the countries of the European Union and other European countries with a sepa-
rate collecting system for those devices).
The sign on the product or on its packing indicates that the product must not be handled as
common household waste, but that is needs to be disposed of at a central collection point for
EN
MH25SV
68
Translation of original operating manual
Version 1.0.4 - 2020-12-15
Advertisement
Table of Contents
