Separation Guard; Safety Check - Optimum OPTimill MH 25 SV Operating Manual

1.9.4

Separation guard

Adjust the guard to the correct height
before you start working.
To do so, detach the clamping screw,
adjust the required height and re-tighten
the clamping screw.
A switch is integrated into the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
You cannot start the machine if the spindle
protection is not closed.
1.10

Safety check

Check the milling machine at regular intervals.
Check all safety devices
before each operation,

once a week (with the machine in operation),

after all maintenance and repair work.

General check
Equipment
Guards
Signs,
Markers
Functional check
Equipment
Emergency stop mushroom
button
Separation guard around the
drilling and milling spindle
Version 1.0.4 - 2020-12-15
Img.1-2: Separation guard
Check
Mounted, firmly bolted and not damaged
Installed and legible
Check
When the emergency stop mushroom button is activated, the milling
machine must switch off. It is only possible to restart the machine if the
emergency stop mushroom button is unlocked and the ON switch is
activated.
The milling machine should only switch on when the guard is closed.
Translation of original operating manual
OK
OK
MH25SV EN
15