Table of Contents
Advertisement
Interval
Where?
In case of soiling
As required
Version 1.0.4 - 2020-12-15
What?
How?
The limit switches must be cleaned regularly to ensure further
trouble-free operation.
Cleaning
Img.5-1:
Milling head
Img.5-2:
Milling table
Increased play in the milling head spindle can be reduced by
adjusting the spindle nut. The spindle nuts are readjusted by
reducing the thread flanks of the spindle nut with two take-up
screws. Due to the readjustment, it is necessary to check if
smooth movement over the entire way is still provided, other-
wise wear is considerably increased due to friction between
the spindle nut and the spindle.
Adjustment
Z axis
Img.5-3:
Milling head
Translation of original operating manual
Contactless position
switches
Contactless position
switches
Take-up screws
MH25SV
EN
39
Advertisement
Table of Contents
