Installing Dram Simms - Intel 486MIS Quick Start Manual

Installing DRAM SIMMs

1. The SIMM module should face to the right with pin 72 next to the
power supply connectors.
2. Insert the SIMM at a 45 degree angle, tilted towards ISA slots.
3. Gently push the SIMM to an upright position until it "snaps" into
place.
4. Repeat above steps until the entire bank is filled.
Page 22
When working
SIMMs, it
important that you avoid static
electricity.
yourself by wearing a wrist or
ankle strap.
486MIS System Board User's Manual
with DRAM
is extremely
Always ground