Change Password - Intel 486MIS Quick Start Manual

CHANGE PASSWORD

Follow these steps to change system password. Note that the pass word
cannot be longer than 6 characters.
1. Choose "CHANGE PASSWORD" from the Setup Main Menu and
press <Enter>.
2. If this option has never been used, the screen will display the
following message.
Enter NEW Password:
If you want to disable the password option, just press <Enter> key to
return to the Main Menu.
3. If this option has been used to enter the password, the screen will
display the following message:
Enter Current Password:
Enter the current password (default is AMI) and follow the screen
instructions to change the password.
4. After you correctly enter the current password, the following message
appears prompting you for the new password.
Enter NEW Password:
5. Enter the new password and the following message appears:
Re-Enter NEW Password:
6. Re-enter the new password.
following error message appears:
ERROR, Press Any Key...
If the password is keyed in correctly the following confirmation
message appears:
NEW Password Installed
7. Press <Esc> to exit to the Main Menu.
Page 34
If the password is miskeyed, the
486MIS System Board User's Manual