Intel 486MIS Quick Start Manual page 48

·
Pause - Stops audio playing at its current position. Play will proceed
if you select Pause a second time or if you select Play.
·
Fast Forward/Fast Reverse - Moves forward or backward from the
current track position in 15-second increments.
position crosses a track boundary, cdplayer will access the next or
previous track.
·
Eject - Sends an eject command to the CD-ROM drive. Most drives
support a CD eject function. You can select Eject even if a CD is
still playing.
·
Next/Previous Track - Increases or decreases the current track
number, wrapping around to the first track from the last (or vice
versa) if necessary. If the CD is playing, play will continue at the
new track's starting location.
·
Audio Mode - Allows you to select either Stereo, Left Channel,
Right Channel, or Muted play.
·
CD-Time Mode _ Allows you to change the time display to Elapsed
CD Time, EIapsed Track Time, Remaining CD Time, or Remaining
Track Time.
·
Play Order - Allows You to select either Sequential or Shuffled
Continuous play.
·
Quit - Exits cdplayer. if a CD is playing, it will continue playing to the
end of the CD and will then stop. (You can also exit the Program by
pressing the Esc key.)
You can enter the cdplayer utility, start playing a CD, then quit the utility
while the CD continues playing. If you re-start cdplayer before the CD is
finished playing, the screen will display the current playing time. You can
then switch to a different track and
setting, or eject the CD and start playing a different one.
Page 48 486MIS System Board User's Manual
If the new play
playing, change a