Table of Contents
Advertisement
removable =
fixed_disk =
int =
id =
sync =
disc =
parity =
Page 52
486MIS SCSI configuration information
during load time.
off
This
removable media. By default, removable
media devices are supported.
may want to disable "removable" media
support in order to load their own ASPI
Removable Disk Module.
off
This option disables support for fixed disk
drives. By default, fixed disk drives are
supported. A user may want to disable
"fixed" disk support in order to load their
own ASPI Fixed Disk Module.
A, B
This option is used to select the interrupt
channel of the 486MIS SCSI port. The
486MIS should be jumpered accordingly.
The value is specified in hex (A=10,
B=11).
If not specified, the user will be prompted
for the interrupt channel.
0-7
Always select 7.
on
This option is used to enable or disable
off
SCSI synchronous negotiation on the
486MIS SCSI port. If not specified, the
default value of "on" will be used and the
486MIS SCSI port will negotiate for
synchronous
selected, it will still accept synchronous
negotiation if initiated by the SCSI
peripheral.
on
This option is used to enable or disable
off
SCSI disconnection. If not specified, the
default value of "on" will be used and the
486MIS SCSI port will allow SCSI
disconnection to occur.
selected, the 486MIS SCSI port will not
allow SCSI peripherals to disconnect from
the SCSI bus.
on
This option is used to enable or disable
off
SCSI parity checking on the 486MIS
SCSI port.
value of "on" will be used and the 486MIS
SCSI port will check parity on all data
486MIS System Board User's Manual
option
disables
transfers.
If not specified, the default
support
for
A user
If
"off"
is
If "off" is
Advertisement
Table of Contents
