SAFETY INSTRUCTIONS
DANGER
The permissible upper and lower load limits are defined in chapter 3 (Technical Data) and must be adhered
to. Also refer to the type plate or sticker for details on the maximum permissible load capacity.
You may not make any independent modifications or changes to the lifting device. It may only be operated
in the original condition as delivered.
WARNING
WARNING
Operator duties
The lifting device may only be installed, maintained and repaired by qualified specialists and mechanics.
A qualified specialist is someone who: Has received technical training and has the knowledge and
experience – including knowledge of corresponding regulations – necessary to enable him or her to
recognize possible dangers and implement the appropriate safety measures while performing tasks
Specialists must observe the relevant industry-specific rules and regulations.
11
Suction plates have different load capacities
Risk of falling loads (stone slabs)
►
The permissible load capacity is specified on each suction plate.
Only suction plates manufactured by PROBST may be used.
►
Exceeding the permissible and specified suction plate load capacity is strictly
forbidden.
The lifting device is not delivered with suction plates.
The customer is required to carry out a conformity assessment according
to Article 12 of the Machinery Directive 2006/42 (see chapter 5.3).
There is a risk that the load may fall, crushing body parts or fatally injuring
persons in the vicinity.
Independent modifications and changes compromise the lifting device's required
integrity. Its function may also be compromised.
►
Do not make any on-site modifications to the system.
►
Do not attach any loads to the lifting device with ropes, chains or similar.
Danger of death from falling if the lifting device is used as a means of
transporting humans or animals, or as a climbing aid.
This can result in broken bones, serious injury or even death.
►
Use of the lifting device as a climbing aid or to transport humans or animals is
prohibited.
Need help?
Do you have a question about the SH-3500-B and is the answer not in the manual?
Questions and answers