probst SH-3500-B Operating Instructions Manual page 116

SAFETY INSTRUCTIONS
REGULATORY SIGN
Symbol
6
Meaning
Each person in your company involved in the installation,
start-up, operation, maintenance, and repair of the device
must have read and understood the operating instructions
and especially the chapter "Safety" therein
ATTENTION!
Clean filter daily with compressed air. Do not hit filter
cartridge against any object!!! Exchange in case of much
dirt.
Close the petrol cock when not in use, as gasoline may
escape if shaken during transport
Oil seperatotr element (-0,6 bar)
Check oil level (egauge glass)
Iny case of wetness, 5 minutes dry running.
Daily drain off the condensation water on the device
Hint to oil lievel gauge
Use unleaded fuel only (Min. 91ROZ/RON).
Yearly expert inspection (TÜV)
Order-No.:
Size:
2904.0665 30 mm
2904.0666 50 mm
29040687 50 mm
29040624 58x50 mm
29040685 36x146 mm
29040684 53x100 mm
29040381 150x55 mm
29040673 40x40 mm
29040597 40x70 mm
29040340 30x130 mm
29040056 85x45 mm