Replacing Engine Oil - JLG 800A Service And Maintenance Manual

SECTION 3 - CHASSIS & TURNTABLE

Replacing Engine Oil

1. Allow the engine to warm up. The engine oil should
reach approximately 176° F (80° C).
2. Make sure the machine and engine are level.
3. Switch off the engine.
4. Place an oil tray under the engine.
HOT ENGINE OIL CAN CAUSE BURNS, AVOID CONTACT WITH HOT OIL WHEN
DRAINING.
COLLECT USED OIL IN A CONTAINER SUITABLE FOR DISPOSAL OR RECYCLING.
DISPOSE OF USED ENGINE OIL IN ACCORDANCE WITH ENVIRONMENTAL REGU-
LATIONS.
5. Open the oil drain valve.
6. Drain the oil.
7. Close the oil drain valve.
3-112
8. Pour in new engine oil. Refer to Section 1 for capacity
and refer to Figure 3-82., Engine Oil Viscosity for the
proper grade.
Figure 3-82. Engine Oil Viscosity
3121628