Vessel Adapter Assembly (Vaa) Fuse Replacement - Mercury TDI 3.0L Owner's Operation And Maintenance Manual

The remaining fuses are located in the vessel adapter assembly (refer to your boat owner's manual for location) and on the rear
side of the control unit of the individual instrumentation.
a

Vessel Adapter Assembly (VAA) Fuse Replacement

NOTE: Refer to your boat owner's manual for the location of the vessel adapter assembly (VAA). The key for the VAA was
provided along with the ignition keys.
1. Verify the ignition key is off and the lanyard switch is off.
2. Insert the key into the lock and turn it 1/4 turn to the right to unlock it.
a
3. Lift the cover. A decal on the cover identifies components and fuses inside the VAA.
f
e
d
c
b
a
4. Replace the open fuse with a new fuse of the same current rating.
5. Close and lock the cover to prevent water intrusion and an accidental short circuit.
90-8M0145546 MAY 2018
eng
Engine control module
a - 25‑amp fuse
b - 15‑amp fuse
b
52530
Vessel adapter assembly
a - Locked
b - Unlocked
b
52444
Section 1 - Getting to Know Your Power Package
a - Helm power 5‑amp fuse
b - EFP 1‑amp fuse
c - Feature A 1‑amp fuse
d - T.15 5‑amp fuse
e - Feature B 1‑amp fuse
f - Main power 10‑amp fuse
52510
Page 13