Power Tilt
11. Remove the up relief valve components, down relief orifice, and O‑rings from the power tilt housing.
c
12. Inspect the down orifice screen and up relief valve seat.
Power Tilt Pump Reassembly
1.
Install two new lubricated O‑rings in the power tilt housing.
2.
Install a new lubricated O‑ring on orifice.
3.
Install the filter and orifice.
Page 5B-26
a -
b -
a
c -
b
8442
8452
© 2018 Mercury Marine
Up relief valve components
Down relief orifice
O‑ring
a -
Up relief valve seat
b -
Down orifice screen
a
b
90-8M0125265 eng NOVEMBER 2017