Propeller Shaft And Bearing Carrier Installation - Mercury 15 EFI FourStroke Service Manual

Gear Housing (2.15:1)
5. Slide the pump cover onto the driveshaft. While pushing down on the water pump cover, rotate the driveshaft clockwise to
install the pump cover over the impeller.
6. Secure the water pump cover with four screws. Tighten the screws to the specified torque.
Description
Water pump cover screws

Propeller Shaft and Bearing Carrier Installation

1. Apply 2‑4‑C with PTFE to the bearing carrier O‑ring.
Page 6A-38
a
© 2018 Mercury Marine
b
a - Screws (4)
b - Water pump cover
62846
Nm
6.0
90-8M0125265 eng NOVEMBER 2017
62867
lb‑in. lb‑ft
53.1 –