Water Pump Base Assembly - Mercury 15 EFI FourStroke Service Manual

Gear Housing (2.15:1)
7. Apply 2‑4‑C with PTFE to the new bearing carrier O‑ring. Install the O‑ring onto the bearing carrier.
a
Tube Ref No.
2-4-C with PTFE
95

Water Pump Base Assembly

1. Using a suitable mandrel, press on the face of the water pump seal until the seal is seated in the water pump base.
2. Apply 2‑4‑C with PTFE to the seal lips.
3. Apply 2‑4‑C with PTFE onto a new O‑ring and install the O‑ring onto the water pump base.
b
c
Tube Ref No.
2-4-C with PTFE
95
Page 6A-30
b
62933
Description
a
d
6831
Description
© 2018 Mercury Marine
a - Bearing carrier
b - O‑ring
Where Used
Bearing carrier O-ring
a - Mandrel
b - Seal
c - O‑ring
d - Water pump base
Where Used
Apply to seal lips and O-rings
92-802859A 1
92-802859A 1
90-8M0125265 eng NOVEMBER 2017
Part No.
Part No.