6.
Separate the motor assembly from the power tilt pump and cylinder assembly.
a
Power Tilt Motor Disassembly, Inspection, and Repair
1.
Remove the two cross slotted screws securing the motor housing to the bracket assembly.
2.
Remove the armature from the motor housing.
Test for Short
1.
Test armature on a growler. Follow the growler manufacturer's test instructions.
2.
Indication of a short requires replacement of armature.
90-8M0125265 eng NOVEMBER 2017
b
e
a -
Motor cover
b -
Screws (2)
a
c -
Motor bracket
b
c
8438
a -
Wire harness retaining screw
b -
Power tilt pump and cylinder assembly
c
c -
Motor assembly
d -
4 mm internal hex screw
e -
Reservoir fill plug
d
8455
© 2018 Mercury Marine
Power Tilt
Page 5B-21