Avaya one-X 1603SW Administrator's Manual page 39

Table 7: CM/SIP Configuration Requirements (continued)
Task/Form
Enable applicable calling
features on the Class of
Restriction form
Add a station for each
SIP phone to be
supported using the
Station form (page 1)
Command
change cor
add station xxxxxx
(where xxxxxx
represents the
extension number)
CM/SIP IP Deskphone Configuration Requirements
Field(s) Value(s)
Varied To use the Call Pickup
feature, the Can Use Directed
Call Pickup and Can Be
Picked Up By Call Pickup
fields must be set to "y" for
the affected stations. Note
that Page 3 can be used to
implement a form of
centralized call screening for
groups of stations and trunks
Extension Assign the same extension
as the CM call server
extension administered in
Session Manager or SES
See
Manager (SM) and SIP
Enablement Services (SES)
Administration.
(Station) Type Use 9620SIP.
Port System-populated.
Coverage Path For voice messaging or other
hunt group, if available.
COS and COR Same values as administered
in the previous COS & COR
section(s).
Name The person associated with
the telephone. This name
should match what is entered
for name in the Avaya
Session Manager or Avaya
SES proxy configuration.
Message Lamp Enter the extension of the
Ext station you want to track with
the message waiting lamp.
(Usually the same extension
initially entered on the Station
form.)
Chapter 5: Session
3 of 5
Issue 1 June 2010 39