Setting The Dial Plan On Sip Ip Telephones - Avaya one-X 1603SW Administrator's Manual

- You can use the GROUP feature to logically separate the 1600 Series Global
Telephones from the 1600 Series International Telephones in one enterprise
network by specifying different language/font files in the 46xxsettings.txt file.

Setting the Dial Plan on SIP IP Telephones

Note:
This section only applies to operations with a secondary controller where SM/
Note:
PPM is not available.
In a failover situation, the dial plan is played locally even if a proxy connection is
not available; the user may hear a dial tone but cannot make a call.
During manual dialing, a dial plan allows a call to be initiated without using a Send button and
without waiting for the expiration of a timeout interval. The dial plan consists of one or more
format strings. When the dialed digits match a format string in the DIALPLAN configuration
parameter, the call is initiated. (In an SM environment, PPM retrieves the equivalent dial plan
information in another format, thus the dial plan information from CM).
Valid characters in a format string, and their meanings, are as follows:
digits 0 through 9, inclusive = Specific dialpad digits
* = the dialpad character *
# = the dialpad character # (but only if it is the first character in the dialed string – see below)
x = any dialpad digit (i.e., 0-9)
Z or z = present dial tone to the user (for example, for Feature Access Code (FAC) entry)
[ ] = any one character within the brackets is a valid match for a dial plan string
- = any one digit between the bounds within the brackets, inclusive, is a match
+ = the character following the + can repeat 0 or more additional times, for a valid match
An individual valid dial plan is any combination of the above characters. If there are multiple
valid dial plans, separate each one from the next using an OR symbol ("|"). If the dial plan text
string begins or ends with an OR symbol, that symbol is ignored. Users cannot modify the dial
plan.
Dial plan example:
"[2-4]xxx|[68]xxx|*xx|9Z1xxxxxxxxxx|9z011x+"
Setting the Dial Plan on SIP IP Telephones
Issue 1 June 2010 113