Cm/Sip Ip Deskphone Configuration Requirements - Avaya one-X 1603SW Administrator's Manual

Table 6: Avaya SIP Feature Support (continued)
Feature
Redial
Transfer - attended
Transfer - unattended

CM/SIP IP Deskphone Configuration Requirements

This section refers to Communication Manager (CM) administration on the Switch
Administration Terminal (SAT) or by Avaya Site Administration. The system-wide CM form and
the particular page that needs to be administered for each feature are provided. These features,
which already exist, are not required but are recommended because they optimize the
deskphone user interface. For deskphone configuration requirements for Avaya Aura™ Session
Manager, see Administering Avaya Aura Communication Manager as a Feature Server
(Document Number 03-603479) and related Avaya Aura Session Manager documents, all
available on the Avaya support site.
Table 7: CM/SIP Configuration Requirements
Task/Form
IP Network Region
IP Network Region
Off-PBX Telephones
Station Mapping
Feature - Related
System Parameters
(page 1)
Command
change
off-pbx-station
mapping xxxx
change
system-parameters
features
CM/SIP IP Deskphone Configuration Requirements
Normal Operation with CM/SM
Field(s) Value(s)
RTCP Report SIP telephones have a fixed
Period (secs) reporting period. Note that
this parameter is only
displayed if "Use Default
Server Parameters?" is set to
"n".
Authoritative Make sure that the
Domain Authoritative Domain is set to
the same value as SIP
Domain for Solution.
Bridged call items on this
form MUST be "none" or
"orig."
Music/Tone on This CM setting controls the
Hold music on hold capability for
all endpoints, including SIP
telephones.
Yes
Yes
No
2 of 2
1 of 5
Issue 1 June 2010 37