Vlan Separation - Avaya one-X 1603SW Administrator's Manual

Administering Telephone Options
Note:
If the telephone returns to the default VLAN but must be put back on the
Note:
L2QVLAN VLAN ID, you must Reset the deskphone. See the Reset procedure in
the Avaya one-X™ Deskphone Value Edition SIP for 1603SW-I IP Deskphones
Installation and Maintenance Guide.

VLAN Separation

VLAN separation is available to control access to the voice VLAN from the secondary Ethernet
interface, and to control whether broadcast traffic from the data VLAN is forwarded to the
deskphone. The following system parameters control VLAN separation:
VLANSEP - enables (1) or disables (0) VLAN separation.
●
PHY2VLAN - specifies the VLAN ID to be used for frames forwarded to the network from
●
the secondary Ethernet interface.
PHY2PRIO - the layer 2 priority value to be used for tagged frames forwarded to the
●
network from the secondary Ethernet interface.
Table 12 provides several VLAN separation guidelines.
86 Avaya 1603SW-I SIP Deskphones Administrator Guide