Avaya one-X 1603SW Administrator's Manual page 103

1. While the telephone is on-hook and idle, press the following sequence of keys on the
faceplate of the telephone:
Mute 8 4 3 9 # (Mute V I E W #)
Note:
Press the Mute button momentarily. Do not press this key while pressing other
Note:
keys.
The following text displays left-justified at the top of the display:
View settings
*=next #=exit
2. Press the * button at any time during viewing to display the next name and system value
pair or filename from
cannot display on one line wrap to the next line.
Press the # button at any time during viewing to terminate the procedure and restore the
user interface to its previous state. The names and values display in the following order:
Table 15: Parameter Values
Name
Model
Phone SN
PWB SN
PWB comcode
MAC address
Table 15. The first pair returns after the last pair displays. Values that
System Value
16ccDccc
cccccccccccccccccc
cccccccccccccccccc
nnnnnnnnn
hh:hh:hh:hh:hh:hh
Format
Up to 8 ASCII characters: MODEL
value.
Telephone Serial Number, up to 18
ASCII characters.
Printed Wiring Board (circuit board)
Serial Number, up to 18 ASCII
characters. Applies only to 16xx IP
Telephones that have a
software-readable PWB serial number
and comcode.
9 ASCII numeric characters. Applies
only to 16xx IP Telephones that have a
software-readable PWB serial number
and comcode.
Each octet of the MAC address displays
as a pair of hexadecimal numbers.
Issue 1 June 2010
Interface Control
1 of 3
103