3. Once the GROUP assignments are in place, edit the configuration file to allow each
telephone of the appropriate group to download its proper settings.
Here is an example of a settings file with telephones in three different groups - group "0" (the
default), group "1", and group "2":
## First check if this phone is in group 1. If it is, jump to the
tag GROUP1
##
IF $GROUP SEQ 1 goto GROUP1
##
## Now check if this phone is in group 2. If it is, jump to the tag
GROUP2
IF $GROUP SEQ 2 goto GROUP2
##
## The phone is not in either GROUP 1 or 2 so it is in GROUP 0
{specify settings unique to Group 0}
goto END
# GROUP1
## GROUP 1-only settings go here
{specify settings unique to Group 1}
goto END
# GROUP2
## GROUP 2-only settings go here
{specify settings unique to Group 2}
# END
## The settings here apply to all three groups
{specify settings common to all Groups}
The GROUP System Value
Issue 1 June 2010
71