Avaya one-X 1603SW Administrator's Manual page 38

Avaya Aura Communication Manager Administration
Table 7: CM/SIP Configuration Requirements (continued)
Task/Form
Feature - Related
System Parameters
(page 4)
Feature - Related
System Parameters
(page 4)
Feature - Related
System Parameters
(page 17)
Define the dial plan
formats on the Dialplan
Analysis Table form
Define the access codes
corresponding to the
OPS FNEs on the
Feature Access Code
form
After defining the FACs,
define the FNEs not
provisioned by CM
feature buttons using the
command
Set the appropriate
service permissions to
support OPS features on
the Class of Service
form
38 Avaya 1603SW-I SIP Deskphones Administrator Guide
Command
change
system-parameters
features
change
system-parameters
features
change
system-parameters
features
change dialplan
analysis
change
feature-access-codes
change
off-pbx-telephone
feature-name-
extensions
change cos
Field(s) Value(s)
Directed Call This CM setting controls the
Pickup availability of directed call
pickup.
Extended Group This CM setting allows a user
Call Pickup to answer calls that were
directed to another call
pickup group.
Whisper Page This CM setting controls who
Tone Given To hears the whisper page.
Call Type Includes all telephone
extensions and OPS Feature
Name Extensions (FNEs). To
define the FNEs for the OPS
features listed in
FAC must also be specified
for the corresponding feature.
In a sample configuration,
telephone extensions are five
digits in length and begin with
3 or 4, FNEs are five digits
beginning with 7, and the
access codes have various
formats as indicated with the
Call Type of "fac."
Various fields on
pages 1-5 of the
form
Used to support both OPS
and Extension to Cellular.
Varied y (Yes) or n (No)
Table , a
2 of 5