Self-Test; Error Codes - GE MAC 1200 Service Manual

Self-Test

Error Codes

Revision D
System Test Function: Self-Test
The test results outlined in "Test Results"
test, which is always performed on power-up. if errors are detected, a message
appears on the display after the test, indicating the possible errors. The following
error codes are used to identify the error.
The following error codes appear on the display together with the message Self-test
failed.
ERROR_CODES: 0 Reserved
1 VEKT – error in vector table
2 DRAM – DRAM error
3 SRAM – SRAM error
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 ROMB – ROM error (checksum) in the FLASH
9 Not used
10 Not used
MAC 1200 resting ECG analysis system
2012250-095
on page 3-8 are gathered during the self-
3-9