Important Conventions; Conventions Used In Book - GE LOGIQ S6 Service Manual

GE H
EALTHCARE
D 5162630, R
IRECTION EVISION
Section 1-2

Important Conventions

1-2-1

Conventions Used in Book

Model Designations.
This manual covers the LOGIQ™ S6 scanners.
Icons.
Pictures, or icons, are used wherever they will reinforce the printed message. The icons, labels and
conventions used on the product and in the service information are described in this chapter.
Safety Precaution Messages.
Various levels of safety precaution messages may be found on the equipment and in the service
information. The different levels of concern are identified by a flag word that precedes the precautionary
message. Known or potential hazards are labeled in one of three ways:
DANGER IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT WILL
DANGER
CAUSE SEVERE PERSONAL INJURY OR DEATH IF THE INSTRUCTIONS ARE
IGNORED.
WARNING IS USED TO INDICATE THE PRESENCE OF A HAZARD THAT CAN CAUSE
WARNING WARNING
SEVERE PERSONAL INJURY OR PROPERTY DAMAGE IF INSTRUCTIONS ARE
IGNORED.
Caution is used to indicate the presence of a hazard that will or can cause minor personal injury
CAUTION
and property damage if instructions are ignored.
Equipment Damage Possible
NOTICE
Notice is used when a hazard is present that can cause property damage but has absolutely no personal
injury risk.
Example: Disk Drive will crash.
NOTE: Notes are used to provide important information about an item or a procedure. Be sure to read
the notes; the information contained in a note can often save you time or effort.
1-4
3
Section 1-2 - Important Conventions
LOGIQ™ S6 S M
ERVICE ANUAL