GE LOGIQ S6 Service Manual page 237

GE H
EALTHCARE
D 5162630, R
IRECTION EVISION
8-3-10-8 Printer Registration (cont'd)
5.) Verify that the user defined printer is added in Printflow View.(Example shown: UP-D23MD)
6.) For UP-D23:
When upgrading to BT08, updated printer driver may be loaded and assigned. Before assigning
Print Button to Printer, check 'DEVICE' Tab for multiple UP-D23 Printer, and check for active printer.
7.) Right-click on Save.
2.
SAVE.
Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
3
Figure 8-181 Save
LOGIQ™ S6 S M
ERVICE ANUAL
1.
Verify
that the
user
defined
printer is
added.
8-59