GE LOGIQ S6 Service Manual page 242

GE H
EALTHCARE
D 5162630, R
IRECTION EVISION
8-3-11-1 Service Platform (cont'd)
If the Login window for Service Platform is not displayed on the monitor, the installation of the
CAUTION
Service Platform has failed. Reload the application software or Base System Software (OS) +
application software. Contact a Technical Support for details.
4.) Select GE Service at the "Select User Level" field.
5.) Enter the password for the Service Platform.
6.) Click on Okay.
7.) Verify that the following screen (Service Platform) is displayed on the monitor.
8.) Verify that Service Platform Version is 2.2.0Q.
9.) Click on x located at the upper right corner of the service platform screen to close the Service
Platform and return to the scan panel.
When the service platform is NOT displayed, check if CAPS lock is selected. The CAPS should not be
NOTICE
selected.
8-64 Section 8-3 - Software Loading Procedures (R7.7.x or later with BEP4)
3
Figure 8-189 GE Service
Figure 8-190 Service Platform
LOGIQ™ S6 S M
ERVICE ANUAL