Table of Contents
Advertisement
USB-C Functionality
The HEX70HDU-KIT features USB-C input on the transmitter. The USB-C input supports a full 18Gbps 4K 60Hz
4:4:4 video signal. It also supports up to 60W charging, however, when charging is activated, video bandwidth is
automatically limited to 10Gbps and maximum resolution up to 4K 60Hz 4:2:0 video signals.
Front Panel LED's and Auto Switching
The HEX70HDU-KIT includes LED indicator lights to identify what input is selected. On the Transmitter if an input LED
is solid then it is the selected source and in manual switching mode, if it is flashing then the unit is in auto switching
mode. On the Receiver, there is an input LED for showing whether remote HDBT or local HDMI source is selected, as
well as a dedicated LED indicator that will be solid if auto switching mode is enabled hence the RX LED's will not flash.
Auto switching is enabled by default on both Transmitter and Receiver. When enabled, if a source is disconnected, the
HEX70HDU-KIT will go back to the previously active input, and if the previously active input isn't available it will find the
next active input starting from input 1 to input 4.
EDID Control
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source to negotiate
the best audio and video resolutions that are supported in the system. A global EDID of the HEX70HDU-KIT can be
configured using a combination of DIP switch settings (see below), or using IP / RS-232 commands.
Global EDID Settings
DIP switch position '0' = Off / Up
DIP switch position '1' = On / Down
EDID DIP Switches
[DIP] = 0000:
HDMI 1080p @60Hz, Audio 2ch PCM (default)
[DIP] = 0001:
HDMI 1080p @60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP] = 0010:
HDMI 1080p @60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP] = 0011:
HDMI 1080i @60Hz, Audio 2ch PCM
[DIP] = 0100:
HDMI 1080i @60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP] = 0101:
HDMI 1080i @60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP] = 0110:
HDMI 4K @60Hz 4:2:0, Audio 2ch PCM
[DIP] = 0111:
HDMI 4K @60Hz 4:2:0, Audio 5.1ch PCM/DTS/DOLBY
[DIP] = 1000:
HDMI 4K @60Hz 4:2:0, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP] = 1001:
HDMI 4K @60Hz 4:4:4, Audio 2ch PCM
[DIP] = 1010:
HDMI 4K @60Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP] = 1011:
HDMI 4K @60Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP] = 1100:
DVI 1920x1080 @60Hz, Audio None
[DIP] = 1101:
DVI 1920x1200 @60Hz, Audio None
[DIP] = 1110:
EDID Passthrough
[DIP] = 1111:
Software Controlled EDID (set EDID via TCP/IP or RS-232)
contact:
support@blustream.com.au
|
support@blustream-us.com
|
support@blustream.co.uk
HEX70HDU-KIT
USER MANUAL
05
Advertisement
Table of Contents
Need help?
Do you have a question about the HEX70HDU-KIT and is the answer not in the manual?
Questions and answers