Web Gui Control - BluStream HEX70HDU-KIT User Manual

HEX70HDU-KIT USER MANUAL

Web GUI Control

This following pages take you through the operation of the HEX70HDU web GUI. You must connect the TCP/IP RJ45
socket to your local network in order to access the products web GUI.
By default the Transmitter is set to DHCP, however if a DHCP server (eg: network router) is not installed the IP address
will revert to below details:
Default IP Address is: 192.168.0.200 Default Username is: blustream Default Password is: 1234
The web GUI supports multiple users along with multiple user permissions as follows:
Guest Account - This account does not require a user to login. The Guest account can only change sources for each
zone. Guest access can be changed by the Admin, limiting inputs or outputs, or deleting as necessary.
User Accounts - 7x User accounts can be utilised, each with individual login details. User accounts can be assigned
permissions to specific areas and functions. A User must log in to make use of these functions.
Admin Account - This account allows full access to all functions of the kit as well as assigning users with permissions.
Guest Control Page
The Guest Control page allows a guest user to change inputs without needing to be logged into the HEX70HDU. Simply
select the square that corresponds with the input you wish to select.
10
www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk