CLEANING, DISINFECTING AND STERILIZING
Please conform to the recommendations of the Reprocessing Instructions manual delivered with
your product regarding procedure of cleaning, disinfecting, sterilizing and packing of the components.
Please follow present-day rules about sterilization applicable in your country.
Unit
Clean the unit only with an alcohol-based, commercially-available, colorless disinfectant (ethanol,
isopropanol). The use of scouring powder or an abrasive sponge will damage its surface.
Never remove the silicone caps from the powder chamber holders when cleaning the unit.
Do not use needles on the silicone caps of the powder chamber holders.
50
FB-580_CN_rev_B_01_Not Util AIR-FLOW MASTER.indd 50
13.10.2017 10:00:00