END OF THE TREATMENT
Powder and water purge
Purge ON
Remove the powder chambers before switching the unit off and store them in a dry place.
The powder should not remain over a determined time inside the powder chamber. Read the
instructions delivered with the powders.
After each treatment a purge is necessary to remove all residues of powder and liquid inside the
cords and the handpieces. During a prolonged stop of the unit, it is important to empty the irrigation circuit
to avoid the formation of biofilm.
48
FB-580_CN_rev_B_01_Not Util AIR-FLOW MASTER.indd 48
1x
1
2
13.10.2017 09:59:54