Purge switch and mode
The purge switch allows to depressurize the powder chambers for safe
removal. It also controls the "purge" function (see following pages).
Beeps will be emitted when the purge switch is pressed and the powder
chamber lights will blink. After approximately 1 minute the unit will return
to its previous configuration (or when pressing the switch a second time).
FB-580_CN_rev_B_01_Not Util AIR-FLOW MASTER.indd 45
净化开关和模式
净化开关可时牙粉室降压,以便安全拆除。 净化开关还可控制"净化"功
能(见下页)。
按下净化开关后,将发出蜂鸣声,并且牙粉室指示灯将闪烁。 大约 1 分钟
之后,装置会恢复其之前的配置(或再次按下开关时)。
45
13.10.2017 09:59:47