Using The Flash - Olympus CAMEDIA C-21 Instructions Manual

1 2
LCD Monitor
Écran ACL
LCD-Monitor
Control panel
Écran de commande
LCD-Feld
102
1
E

USING THE FLASH

Select the flash mode according to the shooting conditions.
1
Turn on the LCD monitor in the Record mode, and press
the bottom arrow on the Jog dial to select
• When the LCD monitor is off, press the OK button and look at
the control panel. Use the Jog dial to make a selection.
2
Press the right/left arrows on the Jog dial to select
(Auto-Flash/p. 104),
(Red-Eye Reducing Flash/p. 106),
(Fill-In Flash/p. 108) or
(Off/p. 110).
• The selected flash mode (except Auto-Flash) appears on the
control panel.
Flash Working Range: Approx. 0.2 ~ 4.4 m
Note:
• The flash is being charged while the Green lamp is blinking.
Wait until the Green lamp goes off to take the picture.
• The flash may not have the proper effect when used in the
Macro mode. Confirm the result using the LCD monitor.
• The selected flash mode will remain even after a picture is
taken. When the lens barrier is closed, the Fill-In and Off
modes will return to Auto-Flash.
• The flash cannot be used in the Sequence mode.
.