White Balance - Olympus CAMEDIA C-21 Instructions Manual

1 2
LCD Monitor
Écran ACL
LCD-Monitor
Control panel
Écran de commande
LCD-Feld
138
1
E

WHITE BALANCE

You can select the white balance according to the light source.
1
In the Record mode, turn on the LCD monitor and press
the OK button. Press the bottom arrow on the Jog dial to
select
2
Press the right arrow on the Jog dial to select AUTO,
(Daylight), (Overcast),
(Fluorescent).
• appears on the control panel when a setting other than
AUTO is selected.
• Press the OK button to cancel the Menu. When the Menu is
canceled with a setting other than AUTO selected, the setting
will remain and appear on the LCD monitor.
3
Take a picture.
Note:
• The setting will remain even after a picture is taken, but will
return to AUTO when the lens barrier is closed.
• Select "AUTO" in normal situations.
• The Manual white balance may not work under special
lighting.
.
(Tungsten light) or