Setting The Volume - Viavi OneExpert DSL User Manual

Press the Back/Cancel button to save and exit. The screen and power management
settings are specified.

Setting the volume

You can control the volume of your instrument using the Volume icon on the Tray menu.
1. Display the Tray menu, and then press Volume. The volume scroll bar appears.
2. Either press the + / - buttons on the screen or swipe your finger across the bar to
move the line on the bar, adjusting the volume.
3. Press the Back/Cancel button to save and exit the menu. The volume is set on your
instrument.
Specifying the location for saved files
You can set up your instrument to automatically save test results, screenshots, or other files
to the instrument's file system, a connected USB drive, or both (if applicable).
1. Go to the System Settings menu, then select Save Location.
2. Press the circle to the left of File System, USB device (when available), or Both
(when applicable).
3. Press the Back/Cancel button to save and exit the menu. Files will be saved to the
location (and/or device) specified.
Automatically saving DSL test results
You can set up your instrument to automatically save DSL and One Check DSL test results,
including graphical results in an XML format on the instrument. The XML result output will
then be sent automatically the next time you synchronize to the StrataSync server.
If you enable this function, the instrument will save the results whenever you leave the test
application, stop a test (using the Stop command), or turn your instrument off.
1. Go to the System Settings menu, then select Results Auto-Save.
2. Press the Save DSL Automatically checkbox.
3. Press the Back/Cancel button to save and exit the menu.
When saving the results to an XML file, the StrataSync Tech ID will also be saved. The date
and time that the output was generated and the StrataSync Tech ID will also be captured in
the XML filename.
NOTE:
The XML result file will be saved on your instrument for
90 days or until you synchronize the instrument to the
StrataSync server. After synchronizing to the StrataSync
server, the result file will automatically be deleted.
May 2020
OneExpert DSL User's Guide
22052280, Rev. 016
Chapter 3 Utilities
51