Port Discovery - Viavi OneExpert DSL User Manual

Port discovery

The port discovery feature determines the capability of the port and established connection
speed. In case of mismatch ensure the proper pin out or usage of cat 5/6 pair.
1. Connect an Ethernet cable from the Residential Gateway port to an Ethernet on the
side of the OneExpert DSL.
2. From the Wiring Tools menu, select Port Discovery.
3. Select Start to begin the test.
The Capability is displayed on the left side of the screen, the Established Link is
displayed on the right side of the display.
The table displays the Pair, Skew, and Polarity.
Ping Tool
The Ping Tool is used to verify connectivity to various network resources, and selected IP
addresses.
1. Connect an Ethernet cable from the Residential Gateway port to an Ethernet connector
on the side of the OneExpert DSL.
2. From the Wiring Tools menu, select Ping Tool.
3. If the unit is set up to DHCP, it automatically receives an IP Address and displays the
Gateway and DNS.
4. To set a Ping Target, do the following:
Select Ping Target.
y
Select a target.
y
Enter an address such as
y
Select OK.
y
5. Press Start.
The OneExpert DSL pings the Gateway, DNS and any specified Ping Targets.
May 2020
www.yahoo.com
OneExpert DSL User's Guide
22052280, Rev. 016
Chapter 10 Wiring Tools
219