Selecting A Port And Wavelength; Selecting The Measurement Mode - Viavi SmartClass OLTS-85 Operating Manual

OLTS-85/OLTS-85P
Fig. 17 Measurement display Loss Test
Fig. 18 Edit menu Loss Test

Selecting a port and wavelength

1. Tap the desired wavelength(s) in the measurement display
(only single-mode or multi-mode can be selected).
– or –
[A]
Press the key, tap [Select 
wavelength(s) either by tapping the entry or by using the up/
down arrow keys and pressing the central key.
[F]
2. Press the key to get back to the measurement display.

Selecting the measurement mode

Loss can be displayed as a dB value or as a Pass/Fail indication
based on a customer limit (see
and "Pass/Fail indication" on page
7 L
OSS
S
ELECTING A PORT AND WAVELENGTH
] and select the desired
"Pass/Fail indication" on page 61
68).
T O
EST PERATION
65