Configuration Via Web Interface - ABB EVLUNIC PRO M Configuration Manual

3.3. Configuration via web interface

The necessary settings (main menu "Configuration") for the communication of the charging station are
configured in the web interface. The configuration for the entire charging network is done via the master
charging station.
A network connection is required to access the web interface of the master charging station. The
network connection can be made via LAN, WLAN, WLAN access point or GSM (e.g. with PC or mobile
device).
The web interface of the master charging station can be accessed by entering the IP address of the
master charging station in a web browser.
The IP address of the master charging station is determined differently depending on the connection
type.
WLAN access point
Router with integrated DHCP
server
Master charging station with
local DHCP server
A login is required to use the web interface.
The login data for the first login in the web interface is printed on the configuration label. The
configuration label is in a pouch which is enclosed with the mounting material. For security reasons,
change the password after the initial login.
Fig. 3-5: Configuration label
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
The IP address of the WLAN access point is printed on the
configuration label.
The charging station automatically receives an IP address via the
DHCP server of the router. The IP address is displayed on the
charging station display when the charging station is (re)started.
The IP address can also be determined via the router.
The local DHCP server has been activated for the master charging
station, which automatically gives the master charging station
the following IP address: 192.168.42.1
The DHCP server of the charging station is deactivated in the
delivery state and can be activated via the configuration in the
web interface.
DOCUMENT ID.
CHARG ING STATIO N
REV. LANG.
TBA A EN
PAGE
17/37