ABB EVLUNIC PRO M Configuration Manual page 10

2.1.2. WLAN (optional)
EVLunic Pro M can be connected to a router via the integrated WLAN interface. If the router is connected
to the Internet, a connection to an OCPP backend can be made.
1 EVLunic Pro M
3 Internet
The technical data of the WLAN module can be found in the "Installation Manual".
Information
Only a charging station that is operated as a single charging station can be connected to the router via
WLAN. A charging station that is part of a charging network (master/slave network) must always be
connected to the router via LAN.
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
2 Router
4 OCPP backend
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV. LANG. PAGE
A EN 10/37