Maintenance; Diagnosis And Troubleshooting; Software Update - ABB EVLUNIC PRO M Configuration Manual

5. Maintenance

5.1. Diagnosis and troubleshooting

The FAQs on the ABB website help to rectify possible errors that might occur:
new.abb.com/ev-charging

5.2. Software update

It is recommended to always keep the charging station up-to-date, as it contains functional
enhancements and bug fixes. A software update is available on the ABB website:
new.abb.com/ev-charging
The information and instructions for the current software update from the associated release notes
must also be observed.
A software update may only be performed if no vehicle is plugged in at the charging station.
Information
The software update can take up to an hour. The update process is indicated by a slow orange flashing
of the LED bar.
After the software update, the charging station restarts automatically. The LED bar will flash blue or
green, depending on the authorization setting.
Information
The power supply must not be interrupted during the software update. Otherwise, the software
update is not terminated correctly and further normal operation of the charging station is no longer
guaranteed.
Software update at charging network
A software update for a charging network must be performed at the master charging station (EVLunic
Pro M). The master charging station relays the new firmware to the connected slave charging stations
(Pro S) via the software update.
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV. LANG. PAGE
A EN 35/37