ABB EVLUNIC PRO M Configuration Manual page 19

3.3.1. Main menu
The main menu is divided into the following areas:
• Status
• RFID cards
• System
• Configuratio
Status
This page is divided into the following sections:
Overview
Basic information about all charging stations in the charging network (such as: serial number, IP
address, operating state ...) is displayed here. Next to each listed charging station there is a "Restart"
button to restart the charging station.
By clicking on the respective IP address, a new browser window displays charge information, such as
total power, charge session power, power, voltage, current, state, and event log. The scope of the
displayed information is variant-dependent.
Network Connection
Information about the network interfaces (LAN, GSM, WLAN and WLAN access point) of the master
charging station is displayed here.
Backend
Information about the OCPP backend (such as connection state and address) is displayed here.
RFID cards
This page provides an overview of all stored RFID cards including their authorizations. RFID cards can be
taught-in, edited and deleted. RFID cards can also be exported and imported as *.csv file.
System
The area offers the following options:
• Software-Update
• GSM Info
• WLAN Access Point Info
• Logging
• DSW settings
• Restart System
Software-Update
The currently installed software versions are displayed. A software update can also be performed here.
GSM Info
Information about the GSM connection is displayed and the connection to the set GSM network can be
tested.
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV. LANG. PAGE
A EN 19/37